PRODUCTS

Home Products Auto Cable

105 °C Temperature resistant PVC Insulated Thin Wall Automobile Cables are designed specially for new generation automobiles. In these automobiles the focus is on miniaturisation and optimisation of space which results in increase of temperature in the engine compartments and other locations.

The cables with electrolytic grade bare annealed bunched copper conductors are insulated with a PVC compound specially designed and formulated in-house in a wide range of colours including those with stripes (i.e. double coloured). Shilpi auto cables are manufactured with a specially formulated lead-free PVC compound complying to Restrictions of Hazardous Substances (RoHS) regulations. The PVC compound is impervious to water, petrol, diesel, acids, engine and lubricating oils and grease.
Auto Cables (Copper Conductor & PVC Insulation) of different specifications (considering ambient temperature of 40 °C)
Current in (AMPS) 4 6 7 10 12 13 15 17 20 22 28 29 31 36 37 41 51
DIN 72551Part 6 FLRY-B
Area in sq.Mm.		       0.5   0.75 1.0   1.5     2.5       40 6.0
BS (6862) Area in sq.Mm. 0.5 0.65     1.0   1.5 2.0 2.5 3.0 4.5   6.0 8.0      
Commonly referred size         4mm   5mm   6mm     7mm     8mm    
IS (2465) Area in sq.Mm. 0.5   0.75   1.0   1.5     2.5   4.0         10.0
SPECIAL FEATURES
  • Manufactured from electrolytic grade, bright annealed, bunched, bare copper conductors and hence can carry the rated current without overheating.
  • These are insulated on state-of-the-art extruders with a special grade PVC compound that is formulated and manufactured in-house to the highest safety standards.
  • Shilpi auto cables have a lower overall Dia as compared to regular PVC auto cables which can ideally be used in new generation, modern, compact automobiles. These lower Dia cables are actually more resistant to abrasion than higher Dia cables of other standards.
  • The cables are used by all leading automobile manufacturers in the country. These cables can safely operate under extreme temperatures from -40 °C to 105 °C and are therefore very popular worldwide.
  • Shilpi lead-free cables are specially designed to meet the stringent environmental norms in European countries.
  • The cables are abrasion resistant and therefore less prone to damage, which in turn leads to less chances of a short circuit resulting in fire in the vehicle.
All information given herein is in good faith. Shilpi shall not be liable for any damages arising out of incorrect use or interpretation.
The Company reserves the right to change any of the above specifications without any prior notice.
 
ADVANTAGES
Comparison Chart: Shilpi FLRY(B) cables can be used effectively to carry higher current compared to cables conforming to BS 6862 or IS 2465. As a result, “Shilpi” of lower cross section can be used to save on costs to the tune of 10 to 20%. Thus 1 sq.mm FLRY-B cable can replace 1.5 sq.mm cable of BS 6862 or IS 2465 specification. Similarly 1.5, 2.5 and 4 sq.mm FLRY-B cables can be used to replace higher sizes of cables as seen in the table.