PRODUCTS

RF Cable
- 1/4" Super Flex
  - PE
  - FR
- 3/8" Super Flex
  - PE
  - FR
- 1/2"
  - Flex
    - PE
    - FR
  - Super Flex
    - PE
    - FR
- 7/8"
  - Flex
    - PE
    - FR
  - Super Flex
    - PE
    - FR
  - Low Loss
    - PE
    - FR
- 1 1/4" Low Loss
  - PE
  - FR
- 1 5/8" Low Loss
  - PE
  - FR
Connectors
- DIN type
  - 1/2" S
    - Male
    - Female
  - 7/8"
    - Male
    - Female
  - 1 1/4" S
    - Male
    - Female
  - 1 5/8"
    - Male
    - Female
- N type
  - 1/2" S
    - Male
    - Female
  - 7/8"
    - Male
    - Female
  - 1 1/4" S
    - Male
    - Female
  - 1 5/8"
    - Male
    - Female
Jumper Cable
Accessories
75 ohms Cables
PCM Cables
Power & Control Cables
Auto Cables
Battery Cables

APPLICATION

Used in cable TV operations, Computer networking etc.

CONSTRUCTION

Solid annealed bare copper conductor polyethylene insulated shielded with polyester backed aluminum tape and additional shielding with fine tinned copper braid protected with polyester tape wrapping and sheathed with PVC.

DESIGN / MATERIAL OPTIONS
Conductor Dielectric Cable Configuration	0.7 / 0.9 / 1.0 / 1.15/ 1.6mm Solid Polyethylene / Foam Polyethylene. RG-59, RG-6, RG-8, RG-9, RG-11

IMPORTANT PARAMETERS
Dielectric
	Solid PE	Foam PE
Impedance	75+3 ohms	75+3 ohms
Capacitance	67pF/mtr	53pF/mtr
Velocity of propagation	66%	80%
Attenuation (at 100 MHz.)	(8.75~4.37)dB/100mtr	(6.56~3.83)dB/100mtr

Salient Features for Co-Axial Cables
Polyester backed aluminium tape shielding is done with 100% coverage and additional layer of shielding is provided with fine tinned copper braid. This ensures high quality in the reception and transmission of signals. Manufacturing is done on automatic modern machines and under precisely controlled conditions such that in usage losses are kept at lowest possible. For lower values of capacitance and attenuation losses and higher velocity of propagation cables with foam PE dielectric are preferred over solid PE dielectric.